Product index

Maintenance free operation Measurement of absolute pressure, factory-adjusted to sea level values (SLP) Precise measurement over various measuring ranges Pressure port for measurement of absolute pressures in closed systems

Maintenance free operation Measurement of barometric pressure, factory-adjusted to sea level values (SLP) Various measuring ranges

Measurement of barometric pressure adjusted to sea level values (SLP) Highly accurate measurement of barometric pressure using an inductive measurement cell

Low noise plate gear in a solid metal housing Ball bearing mounted output shaft Variety of output shafts possible IP54 permits use in challenging environments

Differential pressure transmitter in a range of precision classes

The EMA 200 is a portable, battery-powered digital pressure gauge for precise measurement of pressures. Because it is easy-to-use, the EMA 200 lends itself well to maintenance work and customer service applications. It can measure flow rates and determining volumetric flows.

Hand-held pressure gauge portable digital pressure gauge highly accurate and robust

Large range of motion Communication via standard industrial fieldbus or Industrial EtherNet. Torque 15Nm (11.5 ft-lb) High holding torque, even under zero-current conditions 25Nm (18.5 ft-lb). Bus addressing via interface or mechanical switch. Optional Jog Keys for manual operation. Optional bevel gear. Absolute measuring system means no referencing. Optional Power distribution and data ...   more...

Reduces System costs more than 40% Less cabling - Less costs Reduces addresses in bus systems for PLC Needs less space in the machine and switchbox For the connection up to 8 Hiperdrive

Portable pressure calibration device with serial output

Portable pressure calibration device with serial output and higher accuracy

Portable pressure calibration device with analog output

Robust linear drive with a variety of upstrokes Solid metal housing Various lifting forces and setting speeds

System consisting of a stepping motor and integrated electronic control. Positioning is extraordinarily accurate thanks to the units precision ball screw and integrated absolute measuring system. The connection to a bus system simplifies wiring. This linear positioning system is especially suitable for automatically setting tools, stops or spindles, particularly for sheet metal forming equipment,...   more...

Analog input actuates spindle drive and position control loop for the positioning of linear machine components. It can be connected directly to the SPC with high set-point value and high control speed. This system is particularly suitable for use in medical technology, diesel engine control, stroke adjustment of metering pumps, packaging machines and textile machines.

Plate gear with high output torques Compact design and low gear backlash Variety of output shafts and transmission ratios possible Low noise versions available Optional ball-bearing mounting for the output shaft to support high axial forces

Plate gear with low gear backlash Variety of output shafts and transmission ratios possible Hardened and plain-bearing mounted output shaft

Plate gear with low gear backlash Variety of output shafts and transmission ratios possible Hardened and plain-bearing mounted output shaft Low noise versions available

Plate gear with solid metal housing (IP65) Variety of output shafts and transmission ratios possible Low noise versions available Optional ball-bearing mounting for the output shaft to support high axial forces

Differential pressure measurement with scalable measuring range and high level of overpressure protection

Safe differential pressure measurement of flammable gases

Differential pressure transmitter root-extracted volume flow measurement

Differential pressure transmitter for standard applications

Analog input actuates position control loop. Configure as 1Nm (0.75 ft-lb), 5Nm (3.7 ft-lb), or 10Nm (7.5 ft-lb). Motor power and Analog feedback are isolated (E-stop motor without interrupting monitoring). Analog measuring system means no referencing.

Analog input actuates position control loop. Configure as 0.75Nm (0.57 ft-lb), 1.5Nm (1.15 ft-lb), or 3.5Nm (2.5 ft-lb). Motor power and Analog feedback are isolated (E-stop motor without interrupting monitoring). Analog measuring system means no referencing.

Analog input actuates position control loop. Configure as 1Nm (0.75 ft-lb), 5Nm (3.7 ft-lb), or 10Nm (7.5 ft-lb). Motor power and Analog feedback are isolated (E-stop motor without interrupting monitoring). Analog measuring system means no referencing.

Communication via standard industrial fieldbus. Configure as 1Nm (0.75 ft-lb) or 2Nm (1.5 ft-lb). Motor power and Control power are isolated (E-stop motor without interrupting communication). Bus addressing via interface or optional mechanical switches. Optional baud rate selector. Unique field configuration of physical cable orientation (by rotating the cap, three distinct cable connecti...   more...

Analog input actuates position control loop. Configure as 1Nm (0.75 ft-lb), 2Nm (1.5 ft-lb), 4Nm (3.0 ft-lb), or 5Nm (3.7 ft-lb). Motor power and Analog feedback are isolated (E-stop motor without interrupting monitoring). Analog measuring system means no referencing.

Communication via standard industrial fieldbus or Industrial EtherNet. Configure to from 1Nm (0.75 ft-lb), 2Nm (1.5 ft-lb), or 5Nm (3.7 ft-lb). Motor power and Control power are isolated (E-stop motor without interrupting communication). Bus addressing via interface or optional mechanical switches. Optional Jog Keys for manual operation. Optional Brake. Absolute measuring system means no ref...   more...

Communication via standard industrial fieldbus or Industrial EtherNet. Configure as 1Nm (0.75 ft-lb), 2Nm (1.5 ft-lb) or 5Nm (3.75 ft-lb). Motor power and Control power are isolated (E-stop motor without interrupting communication). Bus addressing via interface or mechanical switches. Optional Jog Keys input for manual operation (fieldbus only). Absolute measuring system means no referencing....   more...

Communication via standard industrial fieldbus or Industrial EtherNet. Configure as 1Nm (0.75 ft-lb), 2Nm (0.75 ft-lb), or 5Nm (3.7 ft-lb). Motor power and Control power are isolated (E-stop motor without interrupting communication). Bus addressing via interface or optional mechanical switches. Optional Jog Keys for manual operation. Optional Brake. Absolute measuring system means no refere...   more...

Communication via standard industrial fieldbus or Industrial EtherNet. Configure as 1Nm (0.75 ft-lb), 2Nm (0.75 ft-lb), or 5Nm (3.7 ft-lb). Motor power and Control power are isolated (E-stop motor without interrupting communication). Bus addressing via interface or optional mechanical switches. Optional Jog Keys for manual operation. Absolute measuring system means no referencing.

Communication via standard industrial fieldbus or Industrial EtherNet. Configure as 10Nm (7.5 ft-lb) or 25Nm (18.7 ft-lb). Motor power and Control power are isolated (E-stop motor without interrupting communication). Bus addressing via interface or optional mechanical switches. Optional Jog Keys for manual operation. Absolute measuring system means no referencing.

Communication via standard industrial fieldbus or Industrial EtherNet. Configure as 10Nm (7.5 ft-lb) or 18Nm (13.5 ft-lb) Motor power and Control power are isolated (E-stop motor without interrupting communication). Bus addressing via interface or optional mechanical switches. Optional Jog Keys for manual operation. Optional Brake. Absolute measuring system means no referencing.

Stainless steel process monitoring system specially developed for clean rooms

Plastic process monitoring system with a smooth and resistant surface.

Pressure transmitter with 2 switching outputs

Motor and gearbox unit with limit switches for limitation of the rotation angle Absolute position report via potentiometer Housing with protection class IP55 Optional ball-bearing mounting for the output shaft to support high axial forces